Single Zone Audio Monitoring System for IP Cameras and Recorders

$330.00
In stock
SKU
ASK-4KIT-300
Directly connect to a DVR, network camera or video server

Single zone audio monitoring system designed for direct connection to a DVR, network camera, video server. When ceiling mounted, the microphone can pick up sounds approximately 15′ away or within a 30′ diameter circle. Model IF-1 Interface Adapter receives the wiring from the microphone, supplies power to the microphone and drives the audio signals into the audio input of the recording device. Kit includes an RCA cable for connecting to a DVR or VCR, and a 3.5mm cable for connection to a computer sound card. It also contains a variable gain adjust to prevent overdriving or underdriving the audio signal.

Kit Contains:

  • Microphone
  • IF-1 Interface Adapter
  • 12 Vdc Power Supply
  • Single RCA cable
  • 3.5mm Mono to RCA Adapter
  • 3.5mm Stereo cable

NOTE: Speaker/Amplifier not included. If audio playback from a DVR/VCR is required, you may need to purchase the ASK-4KIT-101.

More Information
Voltage Drop Calculator
Voltage Drop CalculatorCalculates the final voltage for each cable gauge.
Volts/Watts/Amps Converter
Volts/Watts/Amps ConverterCalculates either the volts, watts or amps if two of the values are known.
res_01
Data Sheet6512 KBPDF
res_02
Installation Guide380 KB
Audio Yes
Built in Mic Yes
Outdoor No
Diagonal Size (in) 4
Volts AC 100 ~ 240
Power Supply Included Yes
Volts DC Out 12
Active Deterrent No
Brand Louroe
Write Your Own Review
You're reviewing:Single Zone Audio Monitoring System for IP Cameras and Recorders